ligitek electronics co.,ltd. property of ligitek only rectangle type led lamps LG45030-PF doc. no : qw0905-LG45030-PF rev. : a date : data sheet 12 - apr. - 2006 pb lead-free parts
2.4 9.6 25.0min 1.0min 0.5 typ 1.5 max 4.9 2.54typ 1/5 page LG45030-PF part no. + - note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation ligitek electronics co.,ltd. property of ligitek only package dimensions
2/5 page ligitek electronics co.,ltd. property of ligitek only part no. typical electrical & optical characteristics (ta=25 ) absolute maximum ratings at ta=25 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. viewing angle 2 1/2 (deg) min. 20 min. forward voltage @ ma(v) max. lens peak wave length pnm spectral halfwidth nm luminous intensity @10ma(mcd) typ. emitted part no material green LG45030-PF gap color unit ma ma a mw 30 120 g ratings 10 ir -40 ~ +85 -40 ~ +100 100 forward current peak forward current duty 1/10@10khz parameter operating temperature storage temperature reverse current @5v power dissipation symbol t opr tstg i f pd i fp green diffused 565 30 1.7 2.6 4.5 8.0 65 LG45030-PF
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( " ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 " fig.4 relative intensity vs. temperature ambient temperature( " ) r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 " typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) page forward current(ma) fig.2 relative intensity vs. forward current r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0101001000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40-200204060 1.0 1.1 1.2 500550600650 0.0 0.5 1.0 2.03.04.05.0 80100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 3.5 g chip part no. 3/5 LG45030-PF
dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 2 /sec max 60 seconds max 0 0 preheat 25 120 150 50 100 time(sec) 260 temp( c) 5 /sec max 260 c3sec max soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) 2.wave soldering profile part no. ligitek electronics co.,ltd. property of ligitek only page 4/5 LG45030-PF
part no. page 5/5 ligitek electronics co.,ltd. property of ligitek only reference standard mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 description test condition test item reliability test: 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. low temperature storage test high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) operating life test this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. mil-std-202:103b jis c 7021: b-11 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. solder resistance test thermal shock test high temperature high humidity test 1.t.sol=230 5 2.dwell time=5 1sec solderability test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hours. this test intended to see soldering well performed or not. LG45030-PF
|
